Home > Documents > The Document Lists > Alerts

Document Alerts

An alert notifies you that the processing of a document has stopped and may require attention. Alerts only apply to documents on the Active Documents list.

NOTE: Do not confuse alerts with document status indicators or destination status indicators.

The following table lists the types of alerts that can display, along with the actions you may need to take, if any.

Alerts
Alert	Definition	Action
datatype mismatch	The data type associated with the document is not one the destination is configured to process.	Click on the document and select Change from the pop-up menu and change the data type. Click on the document and select Change destination from the pop-up menu to select a new destination for the document. Or, if the destination supports the data type, add that data type to the destination settings.
deferred	The document priority is too low for the destination's fence value.	Either change the document's priority or the destination's fence value.
dest. busy	The destination selected to process the document is currently busy.	Either wait until the document is processed at the current destination or change the destination.
dest. detached	The destination selected to process the document is currently detached.	Either attach the destination or change the destination.
dest. not found	The destination selected to process the document is not configured as an EasySpooler destination.	Change the destination or add the destination to EasySpooler .
dest. not ready	The destination selected to process the document is not ready to print.	Check the destination. It may need paper or another type of service.
empty printer pool	The printer pool has no members.	Add members to the printer pool or change the destination.
form not loaded	The form required for this document is not loaded in the printer.	Either make sure the form is loaded in the printer or, if appropriate, change the requirement.
member detached	All members of a failover printer pool have been detached.	Reattach the members of the pool printer.
no dynamic addr	The destination selected to process the document is controlled by a PC that uses dynamic addressing. This PC is currently either disconnected from the network or turned off.	Either turn the PC on or, if turned on, connect it to the network.
permission error	The EasySpooler administrator does not have read permission for the spool file associated with the document.	Check the system umask settings in the security definitions. Look at the entries for Obey UNIX Perms and Create Permissions (u,g,o).
pg count limit	The document exceeds the page count limit for every member of the selected printer pool.	Increase the page range for each member of the printer pool.
scheduled	The document is scheduled to be processed at a designated time and date in the future.	Wait until the scheduled time arrives, change the scheduled time and date, or click the document and select Release from the pop-up menu to process the document on demand.